大连海洋大学学报 2010, Vol. 25 Issue (1): 52-54 DOI: 10.3969/j.issn.1000-9957.2010.01.011
|
画法几何与机械制图题库的研制与开发
马莉莎,姜忠爱,董利锋,郜颖,蔡卫国,周立彬
大连水产学院理学院
Development of an engineering - drawing item bank system
MA Li-sha, JIANG Zhong-ai, DONG Li-feng, GAO Ying, CAI Wei-guo, ZHOU Li-bin
School of Science, Dalian Fisheries Univ., Dalian 116023, China
摘要 针对当前对“工程图学基础”、“画法几何与机械制图”、“工程制图”等制图课程实现教考分离、试卷规范、出题合理的要求,开发研制出一套随机选题和组卷的计算机题库系统。该系统以大量的电子版试题为基础,通过VB平台开发出性能可靠的选题和组卷系统,实现了选题与出卷的规范性。
关键词:
题库
VB
AutoCAD
机械制图
Abstract: An item pool system has been developed programmed by Visual Basic to improve the standard of test papers by separation of teaching and testing of serial courses including Engineering Drawing and Descriptive Geometry. This system is found to realize the function of choosing and showing corresponding test item, leading to a standard test paper.
Key words:
item bank
VB
AutoCAD
engineering drawing
发布日期: 2016-12-30
期的出版日期: 2010-02-21
引用本文:
马莉莎, 姜忠爱, 董利锋, 郜颖, 蔡卫国, 周立彬. 画法几何与机械制图题库的研制与开发[J]. 大连海洋大学学报, 2010, 25(1): 52-54.
MA Li-sha, JIANG Zhong-ai, DONG Li-feng, GAO Ying, CAI Wei-guo, ZHOU Li-bin. Development of an engineering - drawing item bank system. Journal of Dalian Ocean University, 2010, 25(1): 52-54.
链接本文:
https://xuebao.dlou.edu.cn/CN/10.3969/j.issn.1000-9957.2010.01.011
或
https://xuebao.dlou.edu.cn/CN/Y2010/V25/I1/52
No Suggested Reading articles found!
Viewed
Full text
Abstract
Cited
Shared
Discussed